Akses point Acconet WR-24EXT biasa digunakan untuk akses point WISP, Hotspot, atau Rt-Rw Net juga sebagai Bridges / Point To Point
Dengan Output Power 26 Dbm (400 MW) maka jangkauannya akan semakin jauh.
26dbm 400 mW Wireless Outdoor Multi-Client Bridge/AP/ Acconet WR-24EXT
Product Description
This High power outdoor router enables you to use any external antenna such
as an omni antenna to distribute a wireless signal to surrounding clients. The
unit fully supports AP/Router/Client/Bridge that is compliance of IEEE 802.11b/g
standard.
The unit supports NAT and QoS which is ideal for a last mile or VoIP solution.
The router ships with a 48v power over Ethernet injector making the client side
installation easy.
The enclosure is completely weatherproof and has an IP66 outdoor rating against
ingress of water or dust.
A pole mounting bracket is included which allows the enclosure to be mounted on
poles up to 50mm(1.97 inches) in diameter.
+ High Power, Long Range outdoor Router
+ External N-type female connector
+ Weatherproof RJ45 Connector
+ Aesthetically pleasing
Support :
+ VPN
+ Router
+ Bandwidth Management
Product Features
|
| Features |
Benefits |
| High Speed Data Rate Up to 54Mbps |
Capable of handling heavy data payloads such as MPEG video streaming |
| High Output Power up to 26 dBm |
Excellent output power spreads the operation distance |
| IEEE 802.11b/g Compliant |
Fully Interoperable with IEEE 802.11b/IEEE802.11g compliant devices |
| Point-to-point, Point-to-multipoint Wireless Connectivity |
Let users transfer data between two buildings or multiple buildings |
| WPA/ IEEE 802.1x Authenticator support |
Powerful data security |
| WDS (Wireless Distribution System) |
Make wireless AP and Bridge mode simultaneously as a wireless repeater |
| Watertight and Weatherproof |
Avoid water invaded and weather corroded |
| Wide temperature range and robust mechanical design |
Delivers reliable, top performance in the most demanding environments |
| Power-over-Ethernet (IEEE802.3af Compliant) |
Flexible Access Point locations and cost savings |
|
|
Product Spec
|
|
|
| Data Rates |
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
|
| Standards |
IEEE802.11b/g, IEEE802.1x, IEEE802.3, IEEE802.3u |
| Compatibility |
IEEE 802.11g/ IEEE 802.11b |
| Power Requirements |
Active Ethernet (Power over Ethernet) -48 VDC/0.7A
External Unit: Auto sensing 100/240 VAC; 50/60 Hz |
| Surge Arrester (Option) |
20KA Surge Current |
| Regulation Certifications |
FCC Part 15/UL, ETSI 300/328/CE |
| RF Information |
|
| Frequency Band |
2.400~2.484 GHz |
| Media Access Protocol |
Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) |
| Modulation Technology |
Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36 Mbps
64-QAM @ 48 and 54 Mbps |
| Operating Channels |
11 for North America, 14 for Japan, 13 for Europe, |
Available transmit power
(Typical) |
25dBm Min. @1, 2, 5.5 and 11Mbps
23dBm Min. @6, 9, 12, 18Mbps
22dBm Min. @24, 36Mbps
21dBm Min. @48, 54Mbps |
| RF Connector |
SMA Type (Fr)-Optional |
| Networking |
|
| Topology |
Ad-Hoc, Infrastructure |
| Operation Mode |
Point-to-Point/ Point-to-Multipoint Bridge/ AP/ Client Bridge/ WDS |
| Interface |
One 10/100Mbps RJ-45 LAN Port |
| Security |
IEEE802.1x authenticator / RADIUS client (EAP-MD5/TLS/TTLS) support in AP mode
WPA2/WPA/ Pre Share KEY (PSK)/ TKIP/ AES
MAC address filtering
Hide SSID in beacons |
| IP Auto-configuration |
DHCP client/server |
| Management |
|
| Configuration |
Web-based configuration (HTTP)
Telnet configuration
SNMP V1(MIBI, MIBII) |
| Firmware Upgrade |
Upgrade firmware via web-browser
Serial Interface (RS-232)
TFTP
|
| Physical |
|
| Dimensions |
163.8(L)mm * 135.2(W)mm * 47.0(H)mm |
| Weight |
1.2 Kg (2.6 lbs) |
| Environmental |
|
| Temperature Range |
Operating: -20C to 60C (-4F to 140F)
Storage: -40C to 80C (-40F to 176F)
|
| Humidity (non-condensing) |
5%~95% Typical |
|
|
Support Resources
|